top of page
Alto Professional ZMX862

Alto Professional ZMX862

6-CHANNEL COMPACT MIXER
  • 12 total inputs including XLR jacks w/ phantom power on ch. 1 & 2
  • Expanded channel count perfect for small groups or sub-mixes
  • High headroom circuitry offering extra dynamic range
  • Ultra-low-noise discrete mic preamps
  • 2 aux sends per channel for external effects and monitoring
  • 3-band EQ on each channel
  • Two stereo input channels with balanced TRS jacks
  • Aux inputs/outputs for external audio source integration
  • Switchable phantom power

  • Tech Specs

    Input Channels: Mono channels (Ch. 1 - 2)
    Microphone Input: Electronically balanced, discrete input configuration
    Frequency Response: 20 Hz to 22 kHz, +/-1 dB
    Distortion (THD&N): ≦0.005% at +4 dBu, 1 kHz
    Gain range: 0 dB to 50 dB (Mic)
    Maximum Voltage Gain: 70 dB Ch. Mic Input→Main MIx out & Tape out, 80 dB Ch. Mic input→Control room & Phones, 60 dB Ch. Mic input→Aux send
    SNR (Signal to Noise Ratio): ≧110 dBu
    Phantom power (Mic Pin 2 / Pin 3 and Pin 1): +48 V - with switch control

    Line Input: Electronically Balanced
    Frequency Response: 20 Hz to 22 kHz, +/-1 dB
    Distortion (THD&N): ≦0.005% at + 4 dBu, 1 kHz
    Gain Range: 15 dBu to 35 dBu

    Stereo Channels: (Ch. 3 - 6)
    Line Input: Electronically Balanced
    SNR (Signal to Noise Ratio): ≧110 dBu
    Frequency Response: 20 Hz to 22 kHz, +/-1 dB
    Distortion (THD&N): ≦0.005% at + 4 dBu, 1 kHz
    Gain range: -20 dBu to +20 dBu, 60 dB Ch. Line → Main Mix out
    Maximum Voltage Gain: 20 dB FX return → Main Mix out, 20 dB RCA Tape input → Main Mix out

    Impedance
    Microphone Input: 3.9 kOhms
    All Other Inputs: 10 kOhms or greater
    Tape Out: 1 kOhms
    All Other Outputs: 120 Ohms

    Equalization
    Mono Channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz
    Stereo Channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz

    Main Mix Section
    Tape, Aux, Phones Output
    Output level: 0 dBu Unbalanced, 1/4" jacks, Max out +22 dBu Unbalanced, 1/4" jacks noise (Bus Noise): ≦-90 dB @ 20 Hz - 22 kHz (channel & Main level at 0 dB, other at minimum, DSP mute)

    Power supply: 18 V, 1500 mA
    Rated Power Consumption: 18 W
     

    Dimensions (WxLxH): 202mm x 250mm x 58mm
    Weight: 3.75 lb

bottom of page